Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 In this article, with the support of the video, we will see how to disassemble the car radio of our Nissan Qashqai J10, in the case of the video to replace it with an Android car radio. To remove the car radio, you need to use the appropriate tool and lever on the sides of the mask to remove it, once the mask is removed, remove the emergency flash connectors and all connectors, now remove the mask completely to access the car radio, remove the fixing screws, once the screws are removed, extract the car radio and disconnect the connectors, at this point connect the connectors of the new car radio, and the emergency flash connectors, then reinsert the mask and the car radio. To fix the mask, simply press with your hands to reinsert the fixing pins.
Posted on 4 May 2024 by ScegliAuto
How to enter the Nissan Qashqai j10 car radio unlock code
Nissan Qashqai (2006-2014 / J10) The guide shows how to enter the Nissan Qashqai j10 car radio unlock code. To enter the code it is necessary to have the code supplied with the vehic
Where is the fuse box of the 2008 Nissan Qashqai located?
Nissan Qashqai (2006-2014 / J10) If you own a Nissan Qashqai J10 (year 2008) and want to find out where the fuse box is located, all you have to do is carefully read our new mini gui
How to replace the gear knob on Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) If the gear knob inside your Nissan Qashqai J10 (year 2006-2014) is excessively worn and you want to replace it, then you just have to put the follow Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |