Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Homemade roof bars for Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Roof Rack Bars
Operation: Homemade roof bars for Nissan Qashqai

In this video we see how to make handmade bars for the Nissan Qashqai. Of course, some skill and welding knowledge are necessary to make this type of bars, which will give a lot of satisfaction to those who can build them. You will need two zinc-coated steel iron bars about 130 cm long, and some pre-shaped iron pieces to weld and drill, which will serve as collars. The video shows us how to weld the collars and how to finish them. Each collar must then have two 6 mm holes. We will also make holes in the bars at the right distance. Trim the excess length of the bars. We will cover the bars with polyurethane packaging. Then you will need 8 6 mm bolts to secure the collars, with the nut inside and the butterfly nut outside.


Posted on 13 May 2024 by ScegliAuto



Installation of the roof bars for the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today's guide will show us how to install the roof bars or roof racks of the Nissan Qashqai, following the instructions below. First, let's get the r
Installation guide for Nissan Qashqai roof racks.
Nissan Qashqai (2014-2022 / J11) In this guide, we will look at the instructions that will allow us to install the roof bars or roof racks of the Nissan Qashqai. First, we need to ge
Fitment of roof bars Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video we will see how to mount the roof bars on Nissan Qashqai. The concept of assembling the bars is not simple, especially if you want to d

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos