Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to deactivate the audible seat belt warning on the Nissan Qashqai J10

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Bodywork
Operation: How to deactivate the audible seat belt warning on the Nissan Qashqai J10

In this video we can see how to disable the audible seat belt warning on the Nissan Qashqai J10; we must point out that it is not advisable to perform this operation, as it is a warning that serves to remind us to fasten the seat belt, both for the driver and the passenger, and therefore for our safety. However, we can understand that it can sometimes be a very annoying sound, especially when maneuvering. We need to go under the seat belt latch: here there is a cable with two wires that sends current to the buzzer that warns us of the unfastened seat belt. Just cut one of the two wires and it's done.


Posted on 15 May 2024 by ScegliAuto



How and when to replace the timing belt on the Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) Let's find out in this video the step by step instructions to remove and replace the timing belt, and when to change it, on the Nissan Qashqai 1.5 DC
How to remove the timing belt of a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before we begin, we will need to lift our Nissan Qashqai. So let's start by disassembling and removing the front wheel and the internal wheel arch, u
How to replace the timing belt on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before we can start, we will have to go and open the front hood of our Nissan Qashqai. So let's start by removing the timing belt cover. After that,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos