Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to replace the heat exchanger pipe on an Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Oil vapor pipes
Operation: How to replace the heat exchanger pipe on an Opel Corsa

Before you can begin with this procedure, I highly recommend bleeding the cooling system and removing the oil. So let's start by removing the oil filter, using a socket wrench. By doing so we will have reached the heat exchanger tube. To be able to disassemble it we will have to remove the two bolts that secure it. Once we have removed these two bolts, we can go and remove the tube from the exchanger. Once this is done, to mount the new tube we will simply have to follow these steps in reverse, and we will have successfully completed the replacement.


Posted on 30 December 2023 by ScegliAuto



Removing the heater radiator from the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below we will see the procedure that will allow us to disassemble and replace the passenger compartment heating radiator of the Opel Corsa. First we
Radiator replacement on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today we will briefly show you how to replace the radiator on Opel Corsa. Before getting to the exchanger you will have to remove the front bumper: t
How to replace the radiator / heat exchanger on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Let's find out in this video the steps to remove and replace the internal radiator of the passenger compartment heating on the Opel Corsa D. First we

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos