Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to replace the oil pressure switch

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Oil pressure switch
Operation: How to replace the oil pressure switch

This video guide shows you how to replace your car's oil pressure switch, as you can see the switch is located next to the dipstick. First disconnect the connector on the head, then with a twenty-four millimeter wrench loosen the fixing nut and proceed by manually unscrewing the component to the end, helping yourself with both hands to prevent the piece from falling into it. Take the spare part and screw it manually, tighten it only at the last with the use of the 24 key. Then reconnect the connector. The guide concerns the Opel Corsa with Ecotec engine.


Posted on 22 June 2023 by ScegliAuto



How to disassemble the oil pressure sensor on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) Let's find out in this video the instructions on how to disassemble and replace the engine oil pressure sensor of the Opel Corsa C. First of all, we
Oil pressure sensor replacement
Vauxhall Corsa (1993-2000 / Corsa B) The oil pressure is a very important parameter for the correct functioning of the engine. The engine oil pressure sensor is located on the left front
Oil pressure sensor replacement
Vauxhall Corsa (2006-2014 / Corsa D) The engine oil pressure sensor is located right next to the oil level control stick: to facilitate the replacement of this sensor, remove the stick m

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos