Do it yourself
| ||||
|
Vauxhall Meriva - Video tutorial
Model: Vauxhall Meriva
Meriva B, MK 2
- Years 2010-2017 If the message "Code 60" appears on the dashboard of our Opel Meriva, it means that the side window on the passenger side is not calibrated correctly. This problem may occur, for example, after disconnecting or replacing the battery, as the control unit of the various devices will lose the various data stored in memory. To remove the warning from the dashboard, simply turn on the instrument panel, open the window completely and close it again. This procedure is also valid for the driver's window in case the message "Code 59" appears.
Posted on 8 May 2024 by ScegliAuto
What does the "code 82" message indicate in the Opel Meriva and how can it be removed?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) If the "code 82" message appears on the instrument panel of our Opel Meriva, it means that it is time to have the service done as we have exceeded th
What does the message "code 82" indicate in the Opel Meriva and how can it be removed?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) If the "code 82" message appears in our Opel Meriva, it means that the time or mileage interval for the service has been reached, and therefore we wi
What does the message "Code 82" indicate in the Opel Meriva and how to remove it?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) If the "Code 82" message appears on the instrument panel of our Opel Meriva, it means that it is time to have the service done as we have exceeded th Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.043
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |