Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How do you replace the fuel pump of the Opel Meriva?

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Fuel pump
Operation: How do you replace the fuel pump of the Opel Meriva?

In order to replace the fuel pump of the Opel Meriva, it will be possible to loosen the screws that secure the rear seat bench, which can then be removed from its position; once this has been detached, it will be possible to locate the cover of the pump by removing it as well. At this point, it will be possible to proceed by loosening the screws that secure it to its position, then disconnecting all the connectors present on its upper part; the new piece can now be inserted in place of the old one, by assembling all the components that were just removed.


Posted on 10 May 2024 by ScegliAuto



How to replace the fuel pump in the Opel Meriva?
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) In this tutorial, we can see how to replace the fuel pump in the Opel Meriva, an extremely simple and fast operation. First of all, make sure that th
Disassembly of the Opel Meriva water pump
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) In this video tutorial we will see how to disassemble the water pump of an Opel Meriva. To access the pump we have to remove the right front wheel: f
Where is the power steering pump located in the Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this video we can see where the power steering system pump of the Opel Meriva B is located, useful in case we need to check its status or the leve

    Frequently Asked Questions

    • Meriva 2010-2017 - Where is the fuel pump located in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - Where is the petrol pump located on the Opel Meriva? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos