Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Astra
  6. : How do you replace the coolant sensor of the Opel Astra H?

Vauxhall Astra - Video tutorial

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Coolant temperature sensor
Operation: How do you replace the coolant sensor of the Opel Astra H?

The explanation provided in detail in this video helps us understand exactly what work the sensor in question, also called a bulb, performs. It protects the engine from the risk of overheating and therefore from the possibility of causing damage, such as a burned head gasket. Replacing it is not a complicated operation, in fact, after locating it, specifically located at the base of the radiator, you must disconnect the power cable connector and use an adjustable wrench to unscrew it and remove it from its seat easily. Reverse operation for installing the new one.


Posted on 10 May 2024 by ScegliAuto



Replacement of the water temperature sensor of the Opel Astra 1.6 8V
Vauxhall Astra (1998-2006 / Astra G) In this short and simple guide we will see the instructions that will allow us to disassemble and replace the coolant temperature sensor of the Opel
How to replace the coolant temperature sensor of the Opel Astra H.
Vauxhall Astra (2004-2010 / Astra H) The replacement of the coolant temperature sensor on Opel Astra H models is a very simple procedure. Let's start by opening the engine compartment an
Water sensor replacement on Opel Astra
Vauxhall Astra (2009-2016 / Astra J) How do you disassemble the coolant sensor? We disassemble the Opel Astra coolant reservoir. We raise the front hood to access the coolant reservoir.

    Frequently Asked Questions

    • Astra 2015-2022 - Where is the coolant sensor located on Opel Astra? Read Answer
    • Astra 2004-2010 - Where is the Opel Astra engine temperature sensor located? Read Answer
    • Astra 2004-2010 - Where is the engine temperature sensor located on my Opel Astra 1.3 cdti? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos