Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Combo
    4. : Restoring the Maintenance light on the Opel Combo

Vauxhall Combo - Video tutorial

Model: Vauxhall Combo MK 4, Combo D - Years 2012-2018
Part: Instrument cluster
Operation: Restoring the Maintenance light on the Opel Combo

In this video, it is explained clearly how to reset the service for the Opel Combo MK 4 version: it will be enough to turn on the instrument panel and press the accelerator pedal all the way down. In the next thirty seconds, we will have to press the brake pedal seven times, always all the way down. We continue to hold down the accelerator pedal for a minute, then turn off the ignition and release the pedal. At this point, we will have to wait for another thirty seconds, after which we can turn on the instrument panel and check that the service light has turned off. The job is done.


Posted on 20 May 2024 by ScegliAuto



Where can I find the instructions for adjusting the tire pressure of an Opel Combo?
Vauxhall Combo (2019-2024 / Combo E, MK 5) When the TPMS light comes on in a 2018 Opel Combo model E vehicle, it means that the tire pressure needs to be adjusted. Once this maintenance is don
How to reset the service light of the Opel Combo E
Vauxhall Combo (2019-2024 / Combo E, MK 5) In this our new guide dedicated to all of you owners of the new Opel Combo E we will describe the various steps required in the manual reset procedur
How to reset the service on the 2018 Opel Combo?
Vauxhall Combo (2012-2018 / MK 4, Combo D) In this video, it is shown how to reset the maintenance light on the Opel Combo. This procedure is very simple and takes about 20 seconds to complete

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos