Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. : Elyseo 125

Peugeot Elyseo 125 - Videoguide

Peugeot Elyseo 125
How to replace the spark plug on the Peugeot Elyseo 125.
In this guide, we will see the steps that will allow us to disassemble and replace the spark plug of the Peugeot Elyseo 125 scooter engine. First of all, we …read all…
Posted on 16 September 2023 by ScegliAuto
Peugeot Elyseo 125
How to replace the battery of the Peugeot Elyseo 125 - 50
Today's guide will show us the procedure on how to disassemble and replace the battery of the Peugeot Elyseo 125 scooter, but also of the 50. First we put the …read all…
Posted on 8 June 2023 by ScegliAuto
Peugeot Elyseo 125
How to replace front brake pads on Peugeot Elyseo 125
Let's briefly see in this guide how to disassemble and replace the front brake pads of the Peugeot Elyseo 125 scooter. First, we put our scooter on the center …read all…
Posted on 19 April 2023 by ScegliAuto
Peugeot Elyseo 125
How to change Peugeot Elyseo 125 engine oil
Let's briefly see how to carry out the routine maintenance service on the Peugeot Elyseo 125 scooter, replacing the engine oil and the oil filter. First we put …read all…
Posted on 8 November 2022 by ScegliAuto
Peugeot Elyseo 125
How to remove the variator of the Peugeot Elyseo 125
In this video tutorial we will see how to disassemble and replace the variator of the Peugeot Elyseo 125 scooter, following these simple steps. First of all we …read all…
Posted on 2 May 2024 by ScegliAuto
Battery (1) Spark plugs (1) Engine oil (1) Brake pads (1) (1)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos