Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Kisbee
    4. : How to change the engine oil on Peugeot Kisbee 50cc 4T (2020)

Model: Peugeot Kisbee
Part: Engine oil
How to change the engine oil on Peugeot Kisbee 50cc 4T (2020)

Let's see how to carry out the routine maintenance service of the engine oil change on a Peugeot Kisbee 50cc 4-stroke scooter, from 2020. First we place our scooter on the central stand and start by removing the oil vent bolt that we find under the engine , using a socket wrench; let the old oil drain in a container for about ten minutes, then tighten the bolt with 20 NM of force. We just have to open the filling hole, removing the dipstick, and pour in the new engine oil until it reaches the level indicated by the dipstick!


Posted on 19 February 2024 by ScegliAuto



Replace the muffler on the Peugeot Kisbee 50cc
Kisbee In this video tutorial we will see how to remove and replace the exhaust terminal or the entire muffler on the Peugeot Kisbee 50cc scooter, following
Peugeot Kisbee speed limiter removal
Kisbee In today's video we will see how to remove the speed limiter on a Peugeot Kisbee 50cc scooter, by making these simple changes. First we open and lift
How to change the Peugeot Kisbee 50 engine oil
Kisbee Let's find out below the necessary steps on how to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Peu

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos