Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Speedfight 3
    4. : How to reset the service light on the Peugeot Speedfight 3

Model: Peugeot Speedfight 3
Part: Checks and maintenance
How to reset the service light on the Peugeot Speedfight 3

In this video tutorial we will see how to reset the service light of the oil change routine maintenance on the Peugeot Speedfight third and fourth series scooter. First we turn on the ignition by turning the key; then we wait for the light to go out and then turn off the ignition again, as shown in the video. At this point we turn on the ignition again and then the engine; in this way we will see that the service light has been reset. Perform this operation every time we have reached the mileage for maintenance by changing the oil!


Posted on 23 February 2024 by ScegliAuto



How to replace the Peugeot Speedfight 3 drive belt
Speedfight 3 Today's guide will show us the steps that will allow us to disassemble and replace the transmission belt of the Peugeot Speedfight 3 scooter. First,
How to replace the transmission of the Peugeot Speedfight 3?
Speedfight 3 In order to replace the transmission of the Peugeot Speedfight 3 it is necessary to loosen the screws that fix the casing positioned at the rear whee
How to replace the spark plug on a Peugeot Speedfight 3
Speedfight 3 Below we will see the steps that will allow us to disassemble and replace the spark plug of the Peugeot Speedfight 3 scooter engine. First of all, we

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos