Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Metropolis 400
    4. : How to replace the engine oil in the Peugeot Metropolis 400 scooter?

Model: Peugeot Metropolis 400
Part: Engine oil
How to replace the engine oil in the Peugeot Metropolis 400 scooter?

In this tutorial, we can see how to replace the engine oil in the Peugeot Metropolis 400 scooter, an extremely simple and fast operation to be carried out every 12 months. First of all, we wait for the engine to be cool enough, then we open the cap of the filling hole, locate the drainage hole bolt, and unscrew it using the appropriate square key. Then, we let the oil contained in the system come out, unscrew the old filter, and tighten the replacement. At this point, we can put everything back together and pour the new oil through the designated hole.


Posted on 28 September 2023 by ScegliAuto



We change the engine oil on a Peugeot Metropolis 400 motorcycle
Metropolis 400 Let's change the engine oil on Peugeot Metropolis 400 scooter. Let's see how to do maintenance on the scooter. We stop the scooter with the hand brak
How to reset the service in the Peugeot Metropolis 400 scooter?
Metropolis 400 In this tutorial we can see how to reset the service in the Peugeot Metropolis 400 scooter, a very simple and fast operation, to be carried out only
Peugeot Metropolis 400 remote control battery replacement
Metropolis 400 In this video guide we will see how to remove and replace the remote control battery of the key of a Peugeot Metropolis 400 scooter. First we take ou

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos