Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. :
  3. Kisbee
    4. : Where is the battery located in the Peugeot Kisbee 50 scooter?

Model: Peugeot Kisbee
Part: Battery
Where is the battery located in the Peugeot Kisbee 50 scooter?

In this video, we can see where the battery is located in the Peugeot Kisbee 50 scooter, useful in case we need to replace it, an extremely simple and quick operation. As shown, it is located in the lower area of the scooter, precisely below the door located right in the center of the footboard. To access it, it will be sufficient to open the door, while to remove it, simply disconnect both terminals by unscrewing the respective fixing screws. Make sure to disconnect the negative terminal first, and reconnect the positive terminal first.


Posted on 10 March 2024 by ScegliAuto



How to replace the engine oil in the Peugeot Kisbee scooter?
Kisbee In this tutorial, we can see how to replace the engine oil in the Peugeot Kisbee scooter, an extremely simple and quick operation that should be done
How to top up the engine oil on the Peugeot Kisbee
Kisbee In this short guide, we will see the instructions on how to top up and replace the engine oil on the Peugeot Kisbee scooter. First of all, we put the
Replace the muffler on the Peugeot Kisbee 50cc
Kisbee In this video tutorial we will see how to remove and replace the exhaust terminal or the entire muffler on the Peugeot Kisbee 50cc scooter, following

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos