Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to replace the rear light and bulb on Peugeot 508 SW

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 2 - Years 2018-2024
Part: Tail light
Operation: How to replace the rear light and bulb on Peugeot 508 SW

The rear light of the Peugeot 508 is a unique unit and you will have to disassemble it as a whole and then replace either the bulb or other elements. To do this, you must remove a cover on the side of the rear light from inside the boot. Once removed, you will need to loosen a nut-shaped clamp: the electric cable will now be visible. Press the thread and gently pull the entire headlight outwards. It will take some strength. Once advanced, you will have to disconnect the electric cable as shown in the video. At this point you can replace your light bulb or the whole unit according to your needs.


Posted on 17 September 2022 by ScegliAuto



How to replace the rear light bulbs in Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial we can see how to replace the rear light bulbs in the Peugeot 508, a very simple and fast operation that requires the removal of the
Guide to replacing the Peugeot 508 headlight bulb
Peugeot 508 (2010-2018 / MK 1) Let's see in this guide the main steps that will allow us to remove and replace the Peugeot 508 headlight bulb, following the instructions below. Fir
How to replace the front headlight bulb of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial, we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Peugeot 508. First, we open th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos