Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to top up brake fluid in Peugeot 308 Urea

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 2, T9 - Years 2013-2021
Part: Brake oil
Operation: How to top up brake fluid in Peugeot 308 Urea

In this video we will show you how to top up the brake oil in the Peugeot 308 Urea. First raise the car on a bridge or two pedestals to work comfortably. Then remove the plastic cap that protects the pedal system to access the hose that carries the brake oil. Unscrew the fitting that holds the hose tight and drain the used oil. In the meantime, fill a plastic bottle with new oil and insert a rubber cap to transfer the new oil into the pump. Connect the plastic tube to the hose and start squeezing the plastic bottle to top up the brake fluid. At the end of the operation, tighten the hose again and close everything.


Posted on 28 December 2022 by ScegliAuto



How to reset the Peugeot 308 Urea warning light?
Peugeot 308 (2013-2021 / MK 2, T9) When the Urea warning light on the Peugeot 308 instrument panel lights up, it means that the additional AdBlue fluid level inside the tank is insuffi
How to refill urea on Peugeot 308.
Peugeot 308 (2013-2021 / MK 2, T9) In this video tutorial, we can see how it is possible to refill urea on a Peugeot 308. The first thing to do is to purchase a 10-liter bottle of ISO
How do you reset the AdBlue warning light on the Peugeot 308?
Peugeot 308 (2013-2021 / MK 2, T9) In order to reset the AdBlue warning light on the Peugeot 308, you need to top up the additional fluid, as the light often comes on due to insufficie

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos