Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How do you remove the front seat from the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Seat
Operation: How do you remove the front seat from the Peugeot 206?

To be able to remove the front seat from your Peugeot 206 you must go and push the seat all the way forward, so that the screws located at the rear of its sliding rails can be slackened. Once these screws have been loosened it will be possible to push the seat all the way back and loosen the screws at the front of the seat. At this point it will be possible to disconnect the airbag connector in the lower part of the seat, so that the latter is extracted from inside its housing and replaced with a new one: this must be suitably fixed and connected.


Posted on 13 May 2023 by ScegliAuto



How to remove the front seat of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the seat of the Peugeot 206 damaged? Let's see how it dismounts from the seat. We move the seat back (we press the metal lever) and bring the seat
How to remove the front seat of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's see how to remove the front seat of a Peugeot 206. Disconnect the power supply terminals (located in the engine compartment), move the seat bac
How to remove the seat on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the seat of our Peugeot to be replaced? Let's see how the front seat is removed. We enter the passenger compartment of the car, then we find the t

    Frequently Asked Questions

    • 206 1998-2012 - Why do the front seats of the Peugeot 206 not lock? Read Answer
    • 206 1998-2012 - How do you remove the driver's seat on a Peugeot 206 hatchback? Read Answer
    • 206 1998-2012 - Why does the seat of the Peugeot 206 not lock? Read Answer
    • 206 1998-2012 - How do you fold the rear seats of the Peugeot 206? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos