Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Replacing the headlight bulb with a led one on the Peugeot 508

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Headlight bulb
Operation: Replacing the headlight bulb with a led one on the Peugeot 508

If we want to replace the headlight bulbs with an equivalent LED model on this car from the French company, we will find instructions on how to behave in the video and also in the description below. After opening the bonnet, locate the rubber cap in the rear part of the light unit which must be removed. Then disconnect the electrical terminal and remove the bulb from its seat. Then take the equivalent LED lamp and place it in the housing and then reconnect the terminal using the additional wiring that we will find with the lamp. Finally replace the plastic cover and the game is done.


Posted on 20 May 2023 by ScegliAuto



Guide to replacing the Peugeot 508 headlight bulb
Peugeot 508 (2010-2018 / MK 1) Let's see in this guide the main steps that will allow us to remove and replace the Peugeot 508 headlight bulb, following the instructions below. Fir
How to replace the headlight bulb on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In order to replace the Peugeot 508 headlight bulb, you need to open the hood, so that you can have access to the components inside the engine compar
How to replace the front headlight bulb of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial, we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Peugeot 508. First, we open th

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos