Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How do you remove the battery from a 2013 Peugeot 508?

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Battery
Operation: How do you remove the battery from a 2013 Peugeot 508?

We open the engine compartment and locate the battery, which is located in the lower right corner. In this car model, it is not immediately removable because it is covered by various panels and fixed with different fasteners, so we need to arm ourselves with patience and suitable tools before starting. First, we remove the two superficial plastic panels and then lift the plate of electrical connectors. We disconnect the battery terminals, starting with the negative one, remove the additional panel and various fixing elements, then unlock the base clamp and remove the battery, insert the new one and reassemble everything.


Posted on 24 April 2023 by ScegliAuto



How to remove the battery of a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Before starting, we will have to open the front hood of our Peugeot 508. So let's start by unhooking the clip that fixes the positive pole to the bat
How do you replace the battery of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In order to replace the battery of the Peugeot 508, you need to open the hood so that you can have access to the components located inside the engine
How to replace the battery of the Peugeot 508.
Peugeot 508 (2010-2018 / MK 1) If the battery of your Peugeot 508 first series (year 2010-2018) discharges too quickly due to many years of use and you want to replace it yourself,

Other guides that may interest you

    Frequently Asked Questions

    • 508 2010-2018 - How much does it cost to replace the battery of the Peugeot 508? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos