Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Where is the spare wheel of the Peugeot 206 located?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Wheel
Operation: Where is the spare wheel of the Peugeot 206 located?

The spare wheel of the Peugeot 206 is located at the bottom of the car, in the trunk compartment of the vehicle: it can be accessed by lifting the carpet located at the base of the trunk. By lifting the carpet, it will be possible to locate a lock, inside which the appropriate key must be inserted to allow the wheel to descend from the platform. Once the wheel has been removed from its housing, it can be used for replacement; at the end, the removed wheel can be stored inside the trunk.


Posted on 10 August 2023 by ScegliAuto



How to remove the spare wheel in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This video will explain how to remove the spare wheel in a Peugeot 206, which is located exactly under the rear hood. At first glance, the position o
Where is the spare wheel on the Peugeor 206?
Peugeot 206 (1998-2012 / MK 1) The spare wheel of the Peugeot 206 is located in the lower part of the car, in correspondence with the luggage compartment: in order to access this w
Changing the wheels on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this short and simple guide we will see how to remove and replace the wheels on our Peugeot 206, but also on most of the vehicles of the Citroen-P

    Frequently Asked Questions

    • 206 1998-2012 - Where is the spare wheel located on a Peugeot 206? Read Answer
    • 206 1998-2012 - Where can i find the Peugeot 206 jack? Read Answer
    • 206 1998-2012 - Where is the spare wheel of the Peugeot 206 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos