Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Rifter
    4. : How to reset the tire pressure light in the Peugeot Rifter?

Peugeot Rifter - Video tutorial

Model: Peugeot Rifter MK 1 - Years 2018-2024
Part: Tires
Operation: How to reset the tire pressure light in the Peugeot Rifter?

Resetting the tire pressure warning light in the Peugeot Rifter, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, make sure you have restored the correct pressure to each tire following the instructions in the manual. Let's start by going inside the cabin, then turn on the instrument panel and press the button depicting a vehicle located to the left of the display. Next, enter "Under-inflation initialization," select "YES," and verify that the reset has been successful by restarting the instrument panel.


Posted on 24 August 2023 by ScegliAuto



How to reset the tire pressure on the Peugeot Rifter.
Peugeot Rifter (2018-2024 / MK 1) In this video, we will see how to reset the tire pressure on the Peugeot Rifter. The procedure takes less than 1 minute to complete and does not requ
How to reset the tire warning light in the Peugeot Rifter van?
Peugeot Rifter (2018-2024 / MK 1) In this tutorial we can see how to reset the tire warning light in the Peugeot Rifter van, a very simple operation. Before proceeding, make sure that
How to reset the Peugeot Rifter service light
Peugeot Rifter (2018-2024 / MK 1) Let's see the instructions on how to reset the ordinary maintenance light of the engine oil change of the Peugeot Rifter. First we board the car and

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos