Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
MK 2, T9
- Years 2013-2021 In this video, we see how to check the AdBlue level on the Peugeot 308. On the right side of the dashboard, we will see a button with three squares. If we press it, the maintenance expiration will appear in miles and time, as well as the remaining miles until AdBlue needs to be refilled. This indicates that after a certain number of miles, starting the vehicle will be impossible due to the lack of the additive. There is another way to view this information, and it is through the multimedia screen. We touch the car icon, click on "diagnostics," go to "AdBlue," and here it rightly suggests that we top up the level. In fact, we know that crystallization inside the tank occurs due to the presence of air, and keeping the tank full is the only way to avoid crystallization. If we go to diagnostics now, it tells us that the tank is full.
Posted on 17 October 2023 by ScegliAuto
How to reset the Peugeot 308 AdBlue warning light
Peugeot 308 (2013-2021 / MK 2, T9) Let's see in this guide how to reset the AdBlue warning light on the Peugeot 308, but also on the 3008. Before carrying out the reset, it is necessar
How to remove the AdBlue warning light on a Peugeot 308?
Peugeot 308 (2013-2021 / MK 2, T9) If the AdBlue light has come on in the instrument panel of our Peugeot 308, it means that the level of the pollution-reducing fluid has dropped too l
How to top up AdBlue on a Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) Before we can start, we will have to open the tailgate of the rear trunk of our Peugeot 308. Let's start then by going to disengage and remove the lo Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |