Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to replace the bulbs of the rearview mirrors of the Peugeot 208?

Peugeot 208 - Video tutorial

Model: Peugeot 208 UP, UJ, UB, MK 2, UW - Years 2019-2024
Part: Side turn signal light bulb
Operation: How to replace the bulbs of the rearview mirrors of the Peugeot 208?

The replacement of the bulbs of the external rearview mirrors of the Peugeot 208 follows a very simple procedure, which can be done independently thanks to our video tutorial. The first step is to tilt the inner glass of the external rearview mirror and remove it. Once the mirror is removed, we have access to the inside of the mirror. The second step is to remove the right and left side clips to remove the mirror cover. The third step is to remove the central clip of the spotlight to extract it, allowing us to disconnect the connector and remove it. We remove the bulb and insert a new one. Once finished, we reassemble the mirror and proceed with the next indicator light.


Posted on 18 October 2023 by ScegliAuto



How do the electric mirrors on the Peugeot 208 fuse together?
Peugeot 208 (2019-2024 / UP, UJ, UB, MK 2, UW) In this video we see how the external rear-view mirrors of the Peugeot 208 work: it is possible to close them from the inside using a small button lo
How to disassemble the external rearview mirror of the Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) In this short guide, we will see the step-by-step instructions that will allow us to disassemble and replace the external rearview mirror of the Peug
How to replace headlight bulbs on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the bulbs mounted in the headlight of a Peugeot 208? We open the front hood by pulling the lever located at the bottom right of the da

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos