Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the third brake light on the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Third brake light
Operation: How to replace the third brake light on the Peugeot 3008

In the following mini guide dedicated to all of you who own a first-generation Peugeot 3008 (year 2010), we will discover the various steps you need to take in order to replace the third brake light. First of all, make sure your Peugeot 3008 is turned off, then go to the rear of the vehicle and lift the hood. Next, unscrew the screws that hold the third brake light in place and remove it. Finally, replace it with a new one that is perfectly compatible, and the procedure is successfully completed.


Posted on 18 February 2024 by ScegliAuto



Replace the electric brake button on Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) We replace the electric parking brake button on a Peugeot 3008. We bring the gear knob vertically, then, with a plastic spatula, remove the plastic c
How do you replace the brake pads on a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) To be able to replace the brake pads on your Peugeot 3008, you need to lift the car so that the wheel corresponding to the pads to be replaced does n
How to drive the automatic transmission of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Let's see how to drive well with the automatic gearbox of the Peugeot 3008: remember that any maneuver we have to do on an automatic car, with the ca

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos