Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to replace the wheel on the Peugeot 208

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 3, P5 - Years 2021-2024
Part: Wheel
Operation: How to replace the wheel on the Peugeot 208

In case of a flat tire, it is necessary to replace it, but let's see how to do it taking a Peugeot 308 as an example. The steps to be followed are always the same and are: the first step: position the warning triangle; the second step: remove the bolt cover; the third step: loosen the bolts; the fourth step: position the jack for lifting the vehicle just a little further from the flat tire. The fifth step: lift the vehicle and remove the tire; the sixth step: insert the spare tire and tighten the bolts; the seventh step: lower the vehicle to the ground and tighten the bolts.


Posted on 18 March 2024 by ScegliAuto



How do you replace the rear brake pads on a Peugeot 208?
Peugeot 308 (2013-2021 / MK 2, T9) To be able to replace the rear brake pads of the Peugeot 308 you have to go and lift the car with a jack, so that the corresponding wheel is not in c
Removal of interior lights ceiling on Peugeot 208-308 (universal)
Peugeot 308 (2013-2021 / MK 2, T9) In this video tutorial we will see how to remove the interior ceiling light of the passenger compartment on a Peugeot 208 and 308; this procedure can
Reset service Peugeot 2008, 3008, 208
Peugeot 308 (2007-2014 / T7, MK 1) Today we will see, in this video tutorial, how to reset the oil change routine maintenance service light on various models of the Peugeot group, in p

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos