Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How do you reset the automatic gearbox of the Peugeot 508?

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Gearbox
Operation: How do you reset the automatic gearbox of the Peugeot 508?

To reset the automatic transmission on the Peugeot 508, you need to turn on the instrument panel by turning the key inside the ignition switch. Once the instrument panel is turned on, you can grab the gear selector and pull it upwards, so that it is moved. From the N position, you will need to move it first to the R position, then back to N, then to A, and finally to M; at the end of this operation, you can reposition the selector in the N position and lower it again, noticing that the automatic transmission has been reset to its basic settings.


Posted on 19 March 2024 by ScegliAuto



How do you reset the automatic gearbox of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To reset the automatic transmission of the Peugeot 508, you need to turn on the instrument panel by turning the key in the ignition switch. Once the
How does the automatic gearbox of the Peugeot 508 work?
Peugeot 508 (2018-2024 / MK 2) To use the automatic gearbox of the Peugeot 508, you must first remove the P mode by pressing the button located on the left side of the selector. On
How do you reset the AL4 automatic gearbox?
Peugeot 508 (2010-2018 / MK 1) In this video we can see how to reset the AL4 automatic gearbox of a Peugeot 508 - but the same type of gearbox is also mounted on Citroen - but with

    Frequently Asked Questions

    • 508 2010-2018 - How can I unlock the automatic gearbox of the Peugeot 508? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos