Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 407
    4. : Where is the cabin fan fuse located in the Peugeot 407?

Peugeot 407 - Video tutorial

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Interior blower
Operation: Where is the cabin fan fuse located in the Peugeot 407?

If the cabin fan of our Peugeot 407 suddenly stopped working, we can first of all check the status of the respective fuse whose location is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, under the black plastic cover right next to the battery. It is labeled with the code F11 and is 40A. If faulty, make sure to replace it with a replacement with the same characteristics and operate with the vehicle turned off, otherwise we may damage the fan.


Posted on 28 March 2024 by ScegliAuto



Location of the fuse box and OBD port of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Inside the Peugeot 407 there are three fuse boxes. The first fuse box is located inside the engine compartment, near the battery. The second fuse box
Removing the passenger compartment fan on Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Let's see how to remove the heating radiator on a Peugeot 407. We remove the plastic of the central tunnel lining (located under the central tunnel o
Guide to removing the passenger compartment fan of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Today we will see, in this video tutorial, the guide that will allow us to disassemble and replace the motor of the passenger compartment fan of the

    Frequently Asked Questions

    • 407 2004-2012 - Why is the interior fan of a Peugeot 407 noisy? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos