Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to disassemble the cabin fan in the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Interior blower
Operation: How to disassemble the cabin fan in the Peugeot 3008?

In this tutorial we can see how to replace the cabin fan in the Peugeot 3008, a very simple and quick operation. First of all, make sure the key is not inserted, then go to the driver's side, unlock the various indicated plastic rivets and remove the lower dashboard panel. Next, unhook both the small side storage compartment and the upper panel, dismantle the entire support frame and, after unscrewing the screws, remove the fan from the housing. To install the replacement, just follow the reverse procedure.


Posted on 31 March 2024 by ScegliAuto



How to replace the cabin fan of the Peugeot 3008.
Peugeot 3008 (2009-2016 / MK 1, T84) Today's information will show us the procedure for disassembling and replacing the cabin fan of the Peugeot 3008. First, we get into the vehicle, fro
How to disassemble the cabin fan in the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) In this tutorial we can see how to disassemble the passenger compartment fan in a Peugeot 3008, a very simple operation. First of all, let's position
What is the fuse for the cabin fan in the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) If the cabin fan of our Peugeot 3008 has suddenly stopped working, the first thing we can do is check the condition of the respective fuse, whose loc

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the passenger compartment fan motor located on Peugeot 3008? Read Answer
    • 3008 2009-2016 - Why does the interior fan no longer work in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Where is the interior fan of a Peugeot 3008 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos