Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the courtesy light bulb of the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Light bulb
Operation: How to replace the courtesy light bulb of the Peugeot 206

In this video we can see how to change the courtesy light bulb of the Peugeot 206: we leverage with a small screwdriver in order to remove the plate from its housing, then we remove the electrical connector in order to be able to turn the plate: here we take the gray part with our fingers, applying pressure on both sides in order to remove the bulb with its bulb holder, which will simply come off by pulling it out. The bulb is a 501 W5W 12 Volts 5 Watt, or we can decide to install a LED. If we reinstall a bulb, remember not to touch it with bare hands or we will shorten its life. Let's put it back in its bulb holder that we will reassemble in the plate and put it back in place.


Posted on 31 March 2024 by ScegliAuto



How to replace the interior ceiling light bulb on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the Peugeot 206 internal ceiling light bulb, a screwdriver must be used to pry and extract the light from its housing. Subsequent
How to replace the bulb of the side indicator light of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If one of the two side indicator lights of your Peugeot 206 has suddenly stopped working and you want to find out how to correctly replace the bulb,
How to replace the light bulb on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This video tutorial shows the procedure for replacing the bulb in the front headlights of the Peugeot 206. The procedure for replacing the bulb is: f

    Frequently Asked Questions

    • 206 1998-2012 - What type of lamps does the Peugeot 206 fit? Read Answer
    • 206 1998-2012 - Where is the low beam fuse located on Peugeot 206? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos