Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 5008
    4. : Where is the spare wheel located in the Peugeot 5008?

Peugeot 5008 - Video tutorial

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Wheel
Operation: Where is the spare wheel located in the Peugeot 5008?

In this video we can see where the spare wheel is located in the Peugeot 5008 and how to access it, useful of course in case of a flat tire. As shown, the wheel is not positioned in the classic storage compartment of the trunk but rather underneath it, outside the vehicle. To release the wheel, we first retrieve the tools provided, then open the trunk, locate the small indicated door and open it. We then loosen the bolt that has just been released, using the large tube key, enough to place the wheel on the ground.


Posted on 16 April 2024 by ScegliAuto



How to remove the spare wheel in the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In this tutorial we can see how to remove the spare wheel in the Peugeot 5008, so that you can replace it or use it in case of a puncture. First of a
Guide to replacing the wheel with the spare wheel of the Peugeot 5008.
Peugeot 5008 (2017-2024 / MK 2) Let's briefly see the instructions that will allow us to disassemble and replace the wheel with the spare one of the Peugeot 5008, but also of the 30
What is the fuse diagram for the Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) In this video, we can see where the fuse boxes of the Peugeot 5008 are located and what their respective diagrams are, which is useful in case we nee

    Frequently Asked Questions

    • 5008 2009-2016 - Where is the spare wheel located in my Peugeot 5008? Read Answer
    • 5008 2009-2016 - Where is the spare wheel of a Peugeot 5008 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos