Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the ignition coil on a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Coil
Operation: How to replace the ignition coil on a Peugeot 207

In this video we see how to replace the ignition coil of a Peugeot 207: we start by opening the cover of the engine block; lift the safety of the electrical part and forcefully pull up the coil. We can find a good offer for the coils on E-Bay: the kit of four coils at 67.10 pounds (about 78.55 euros) with delivery at 10.17 pounds (about 12 euros) through Royal Mail. We find them at code 234304602388. Clean the housing well with compressed air and then put the new coil back in place. Before reattaching the safety of the electrical part, spray the connector with electronic spray, then dry it well with a blast of air. Proceed to replace the other coils in the same way, then close the cover of the engine block.


Posted on 19 April 2024 by ScegliAuto



We carry out the replacement of spark plugs on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) We perform the replacement of spark plugs on a Peugeot 207. We pull the lever of the engine compartment opening and lift the front hood, let's put it
How to reset the Peugeot 207 service light
Peugeot 207 (2006-2015 / MK 1) The procedure necessary to be able to carry out the reset of the Peugeot 207 service light is quite simple and takes very few seconds to be completed
How to know the fuse assignment diagrams of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The first fuse box of a Peugeot 207 car is located inside the passenger compartment of the vehicle, behind the cover to the left of the steering whee

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos