Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : How to replace the window lifter in the Peugeot 406?

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Side window
Operation: How to replace the window lifter in the Peugeot 406?

In this tutorial we can see how to replace the window regulator in the Peugeot 406, a very simple operation. First of all, make sure that the key is not inserted, then, using a plastic spatula to avoid leaving marks, unclip the handle frame, speaker cover, top cap, and switch panel. Then separate the panel from the door, remove the soundproofing cover, and disconnect the glass from the mechanism. At this point, all that remains is to unscrew the window regulator bolts, remove it from the lower slot, and install the replacement.


Posted on 29 April 2024 by ScegliAuto



Removing the plastic door on Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Do we want to remove the door panel? Let's see how to remove the cover panel of the Peugeot 406. To remove the cover panel we have to remove some pla
How do you replace the clutch of a Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) To replace the clutch of the Peugeot 406, you need to loosen the bolts that fix the gearbox to its housing: these bolts will be located in the lower
How to reset the partial mileage counter in the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, we can see how to reset the trip meter in the Peugeot 406, an extremely simple and quick operation. This trip meter can be very use

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos