Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to remove the gear knob of the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Gear Shift Knob
Operation: How to remove the gear knob of the Peugeot 206

Removing the gear knob of the Peugeot 206 is a very simple operation to perform independently. To remove the gear knob, you need to lift the gear lever boot as if you were going to remove it and raise the gear lever as much as possible. Once these two steps are done, you can gently rotate the knob to the right and, holding the bracket still, remove it by pulling upwards. Be careful not to damage the gear lever during this knob removal procedure. Also, be careful not to damage the hooks of the gear lever boot when removing it.


Posted on 3 May 2024 by ScegliAuto



How do I replace the gear knob on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the gear knob of the Peugeot 206 you have to remove the old knob from the gear lever, simply by sliding it off. Then it will be n
How do you replace the gear knob of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the gear knob of the Peugeot 206, you need to detach the clips at the base of the leather cover of the gear lever, so that it can
How to replace the gear knob on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's start by removing the gear lever boot with the help of a flat-blade screwdriver. While we will extract the cap, by pulling from the base of the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos