Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the turn signal bulb of the external rearview mirror of the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Side turn signal light bulb
Operation: How to replace the turn signal bulb of the external rearview mirror of the Peugeot 3008

These short and simple steps will show us the procedure for disassembling and replacing the turn signal bulb of the external rearview mirror of the Peugeot 3008. First, let's move to the side and start gently detaching the mirror glass, disconnecting the electrical cable; then gently detach the turn signal light, disconnecting the electrical connector and removing the bulb from the socket, as shown in the video. At this point, we install the new bulb, of the right type and with the same attachment, finally reassembling the mirror!


Posted on 4 May 2024 by ScegliAuto



How to install dynamic turn signals on the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In this video we see how to install dynamic turn signals on the external rearview mirror of a Peugeot 3008. The turn signals can be found under the c
How do you replace the interior rearview mirror of the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the interior rearview mirror of the Peugeot 3008, you need to lever off the plastic cover of the support at the back of the mirror using a
Replacement of the turn signal lamp of the Peugeot 3008.
Peugeot 3008 (2016-2023 / MK 2, P84) When we realize that a front turn signal lamp of the Peugeot 3008 has burned out, we must promptly replace it for our safety and to avoid penalties.

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos