Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to install the power window motor of the Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Window motor
Operation: How to install the power window motor of the Peugeot 307

Today we will discover the instructions that will allow us to replace and install the new mechanism and window motor of the Peugeot 307. First of all, we open the front door and start dismantling and removing the door panel, unscrewing all the fixing screws; we unscrew the screws of the brackets of the window and the window motor, disconnecting the electrical connector to remove it. At this point, we proceed with the reassembly of the window motor and mechanism, checking its operation; we then reassemble the door panel, applying the reverse procedure!


Posted on 8 May 2024 by ScegliAuto



How to remove the starter motor on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Is the starter motor malfunctioning? Let's see how it is disassembled from a Peugeot 307. We open the hood of the engine compartment, disconnect the
How to replace the starter motor of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Unhook and lift the hood, now remove the battery, to protect the various electrical components and consequently its support surface in order to have
Replacement of the starter motor of the Peugeot 307 2.0 HDI.
Peugeot 307 (2001-2009 / MK 1) Today's guide will show us the main information that will allow us to disassemble and replace the starter motor of the Peugeot 307 2.0 HDI. First of

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos