Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : How do you replace the rear headlight bulb of the Peugeot Partner?

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Rear light bulb
Operation: How do you replace the rear headlight bulb of the Peugeot Partner?

The replacement of the rear headlight bulb of the Peugeot Partner is done by opening the rear tailgate of the vehicle, so that it is possible to access the corresponding optical group: the screws next to the headlight can be loosened, so that the optical group can be removed from its seat, disconnecting the connectors connected internally. After removing the connector, it will be possible to remove the corresponding bulb, so that the new one can be inserted: after replacing the bulb, the headlight connector must be reconnected and fixed in its seat with the screws.


Posted on 10 May 2024 by ScegliAuto



How do i replace the headlight bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the headlight bulb of a Peugeot Partner, you need to open the hood, in order to remove the circular cap located at the rear of the headlig
How to replace the headlight bulb of the Peugeot Partner 3
Peugeot Partner Tepee (2018-2024 / MK 3) If one of the bulbs inside the front headlight of your Peugeot Partner Mk3 has suddenly stopped working and you want to find out how to replace it co
Replace the headlight bulb of the Peugeot Partner 2019.
Peugeot Partner Tepee (2008-2018 / B9) If the position light bulb of our Peugeot Partner were to burn out, we must replace it as soon as possible. To change it, we need to open the engine

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos