Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 5008
    4. : How to replace the front headlight bulb of the Peugeot 5008

Peugeot 5008 - Video tutorial

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Peugeot 5008

We see the process of how to disassemble and replace the headlight bulb of the Peugeot 5008, but also of the 3008. First, we open the hood of the car and start removing the plastic cover behind the headlight; then we disconnect the bulb holder to remove it together with the bulb, as shown in the video. At this point, we install the new low beam or high beam bulb, of the correct type and with the same fitting; then we reassemble the bulb together with the bulb holder, finally fixing the rear plastic cover on the front headlight.


Posted on 14 May 2024 by ScegliAuto



How to replace the headlight bulb on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this new guide dedicated to all of you owners of a Peugeot 5008 first series (year 2009-2016) we're going to find out how to replace the headlight
How to change the front headlight bulb of the Peugeot 5008.
Peugeot 5008 (2009-2016 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Peugeot 5008. First of all, we open the en
How to replace the Peugeot 5008 headlight bulb
Peugeot 5008 (2009-2016 / MK 1) In this video tutorial and we will see how to remove and replace the headlight bulb of the Peugeot 5008, in simple and quick steps. First of all we o

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos