Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the timing belt of the Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Timing belt
Operation: How to replace the timing belt of the Peugeot 2008

After covering the recommended kilometers by the manufacturer, usually 80,000 km, it is necessary to replace the timing belt. Today specifically we will see how to replace the timing belt and pulleys of a Peugeot 2008. The first steps to follow are to open the front hood, remove the front wheel on the passenger side and lift the car on a scaffolding. The second step is to "relax" the belt by lifting the tensioner, to do this we use a 13 mm wrench or a 13 mm elbow wrench, then we remove the belt. The third step consists in removing the tensioner, to do this we use an 8 mm hex key to unscrew the screws and remove it. The fourth step is to install the new tensioner and the timing belt. To put the belt back in place, lift the tensioner to pass it through all the pulleys, then release the tensioner. We conclude by reassembling the wheel, lowering the car to the ground and closing the hood.


Posted on 17 May 2024 by ScegliAuto



How to replace the timing belt of a Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Good morning! Today we will focus on replacing the timing belt on our Peugeot 2008. Let's start by positioning the car on a flat surface and making s
How and when to replace the timing belt of the Peugeot 2008 1.2
Peugeot 2008 (2013-2019 / MK 1) Today's guide will show us how and when to replace the timing belt on the Peugeot 2008, with a 1.2 petrol engine; the parent company declares that th
When to change the timing belt of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The timing belt is certainly the most important part of the car, after the safety components (you will find below a video tutorial for its replacemen

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - What to do if the timing belt of the Peugeot 2008 squeaks? Read Answer
    • Peugeot 2008 2013-2019 - What problems with the timing belt of the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - When to replace the timing belt in the Peugeot 2008 diesel? Read Answer
    • Peugeot 2008 2013-2019 - How much does a Peugeot 2008 timing belt replacement cost? Read Answer
    • Peugeot 2008 2013-2019 - After how many kilometers does the Peugeot 2008 timing belt need to be replaced? Read Answer
    • Peugeot 2008 2013-2019 - How much does it cost to replace the timing belt on Peugeot 2008? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos