Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Vespa 125 Primavera
    4. : How do you remove the handlebar of the Piaggio Vespa 125 Primavera?

Model: Piaggio Vespa 125 Primavera
Part:
How do you remove the handlebar of the Piaggio Vespa 125 Primavera?

In order to disassemble the handlebar of the Piaggio Vespa 125 Primavera, you need to loosen the two screws that fix the front headlight of the motorcycle to its housing, so that the headlight can be removed from its seat. Once the connectors at the back have been disconnected, it will be possible to completely remove the optical group, then loosening the screws at the base of the handlebars; this way the fairings can be removed from their housing and the handlebar can be removed. Now you can disconnect all the additional tubes and connectors to completely remove the piece.


Posted on 7 May 2024 by ScegliAuto



How to adjust the time on the Piaggio Vespa 125 Primavera scooter?
Vespa 125 Primavera In this tutorial we can see how to adjust the time on the Piaggio Vespa 125 Primavera scooter, an extremely simple and quick operation, to be carried
How to replace the spark plug of a Piaggio Vespa Primavera 125?
Vespa 125 Primavera Good morning, today's guide aims to replace the spark plug of our Piaggio Vespa Primavera 125. Let's start by removing the side fairings of the motor
How do you set the clock on the Piaggio Vespa 125 LX?
Vespa 125 Primavera To set the clock on the Piaggio Vespa 125 Primavera, you need to insert the ignition key into the corresponding slot and turn it to turn on the dashb

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos