Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Vespa 50 Lx
    4. : How do you replace the spark plug of the Piaggio Vespa 50 LX?

Model: Piaggio Vespa 50 Lx
Part: Spark plugs
How do you replace the spark plug of the Piaggio Vespa 50 LX?

In order to replace the spark plug of the Piaggio Vespa 50 LX, you need to detach the panel located in the rear part of the footrest compartment and immediately under the seat, in the front part. Once this panel is detached, you will be able to locate the coil underneath, which needs to be removed in order to access the spark plug. The spark plug can be removed from its seat using the appropriate socket wrench; after removal, you can insert the new spark plug, so that it can then be connected to the coil, ensuring that everything is functioning properly.


Posted on 7 May 2024 by ScegliAuto



How to replace the spark plug in the Piaggio Vespa LX 50 scooter?
Vespa 50 Lx As we can see in this tutorial, replacing the spark plug in the Piaggio Vespa 50 LX scooter is an extremely simple and quick operation. First of all,
How to change the spark plug of the Piaggio Vespa 50 LX
Vespa 50 Lx Today we will see, in this short and simple guide, how to disassemble and replace the spark plug of the Piaggio Vespa 50 LX scooter engine. First we
How to replace the battery of the Piaggio Vespa 50 LX
Vespa 50 Lx Let's see in this guide how to disassemble and replace the battery of the Piaggio Vespa 50 LX and Vespa 50 S. First of all we put our scooter on the

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos