Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Piaggio X9 250 - Videoguide

Piaggio X9 250
Resetting the Piaggio X9 service indicator light.
Today's instructions will show us how to reset the maintenance service light for the regular oil change of the Piaggio X9 scooter. First, we put our scooter on …read all…
Posted on 11 February 2024 by ScegliAuto
Piaggio X9 250
How to reset the service light on the Piaggio X9?
In this new mini guide of ours, we will discover together how to correctly perform the manual reset of the service light that appears on the dashboard of your …read all…
Posted on 25 November 2023 by ScegliAuto
Piaggio X9 250
How to reset the service on the Piaggio X9 250 scooter?
As we can see in this tutorial, resetting the service on the Piaggio X9 250 scooter is an extremely simple and quick operation. Before proceeding, let's make …read all…
Posted on 11 September 2023 by ScegliAuto
Piaggio X9 250
How do you replace the headlight bulb on the Piaggio X9?
To replace the headlight bulb on the Piaggio X9, you need to completely remove the headlight from its housing by detaching the front fairings and unscrewing …read all…
Posted on 4 April 2023 by ScegliAuto
Piaggio X9 250
Float replacement on Piaggio X9
How to replace the float on Piaggio X9 250. we practically have to disassemble it all. Let's start by removing the two bolts from the saddle compartment and …read all…
Posted on 26 April 2023 by ScegliAuto
Piaggio X9 250
How to change the Piaggio X9 250 engine oil and oil filter
Below we will see the step-by-step instructions to be able to carry out the routine maintenance service, replacing the engine oil and oil filter, of the …read all…
Posted on 25 June 2022 by ScegliAuto
Checks and maintenance (2) Headlight bulb (1) Engine (1) Engine oil (1) Instrument cluster (1)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos