Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Polestar
    3. :
  3. Polestar 2
    4. : How to replace the battery of the Polestar 2 remote control

Polestar Polestar 2 - Video tutorial

Model: Polestar Polestar 2 MK 1 - Years 2022-2024
Part: Key
Operation: How to replace the battery of the Polestar 2 remote control

The guide shows how to replace the battery of the Polestar 2 remote control. The battery needed for the replacement is the CR2032 model. The first operation to be carried out is to press the small unlocking tab on the back face of the remote control, located on the keychain bridge; at this point it is possible to remove the cover by sliding it in the guide. Move the lock tab of the second panel and remove it. Using a flathead screwdriver, rotate the battery compartment cap and remove it. Remove the old battery and install the new one. Close everything and check the correct functioning of the remote control.


Posted on 19 February 2024 by ScegliAuto



How do you replace the battery of the Polestar 2 remote control?
Polestar Polestar 2 (2022-2024 / MK 1) In order to replace the battery of the Polestar 2 remote control, you need to slide the cover at the back of the device so that you can access the co
How to remove the plastic cover of the Polestar 2 key?
Polestar Polestar 2 (2022-2024 / MK 1) Let's briefly see in this guide the main steps that will allow us to disassemble and replace the plastic cover of the key or the internal components
How do you charge the Polestar 2 at home?
Polestar Polestar 2 (2022-2024 / MK 1) The sector of cars with 100% electric engines has now taken over, and Volvo Polestar is an example of this. In this video, the Volvo Polestar 2 is sh

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos