Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : How do you adjust the valves on a Renault Twingo?

Renault Twingo - Video tutorial

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2023
Part: Valve
Operation: How do you adjust the valves on a Renault Twingo?

To adjust the valves on the Renault Twingo, you need to open the hood so that you can access the components located inside the engine compartment. Here, it will be possible to loosen the screws that fix the valve cover to the top of the engine block and remove it completely. This way, you can locate the underlying valves that need to be adjusted using a feeler gauge and following the instructions in the user and maintenance manual. After the adjustment is done, you can reinsert the valve cover, checking that everything works correctly.


Posted on 7 May 2023 by ScegliAuto



How to adjust the valve clearance on Renault Twingo 1.2 16V
Renault Twingo (1993-2007 / Twingo 1) In today's video we will see how to correctly adjust the valve clearance on a Renault Twingo 1.2 16 valve, with D4F702 engine; this procedure also ap
How to adjust the time in the Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial, we can see how to adjust the time in the Renault Twingo, an extremely simple and quick operation, to be carried out, for example, a
How to adjust the time in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In today's video, we will see how to adjust the time in the second-generation Renault Twingo. First, we turn on our car. Once the display is active,

    Frequently Asked Questions

    • Twingo 1993-2007 - Why doesn't the radiator fan of a Renault Twingo work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos