Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the turbine in the Renault Scenic?

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Turbine
Operation: How to replace the turbine in the Renault Scenic?

In this tutorial, we can see how to replace the turbocharger in the Renault Scenic, an operation that requires good manual skills. First of all, we wait for the engine to be completely cold, then we disconnect the intake manifold of the turbocharger by loosening the metal clamp. We continue by unscrewing the exhaust manifold bolts on both sides, remove the turbocharger mounting bolts, and extract it from the housing. To facilitate the work of this last phase, we can remove both the right wheel and the fender and access from the upper area of the suspension.


Posted on 3 August 2023 by ScegliAuto



Where is the OBD port located in the Renault Scenic 3?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) If you want to quickly locate the OBD port of your Renault Scenic Mk3, all you have to do is carefully follow the instructions described in this new
Where is the OBD port located on the Renault Scenic 2012?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) If you own a 2012 Renault Scenic and are wondering where the OBD port is located, all you need to do is carefully read the following instructions and
How to replace the headlight bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before we can start, we will have to go and open the front hood of our Renault Scenic. So let's start by extracting the burnt out bulb from its housi

    Frequently Asked Questions

    • Scenic 2016-2022 - How much does it cost to replace the turbine in the Renault Scenic? Read Answer
    • Scenic 2009-2015 - How do you replace the turbine of the Renault Scenic? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos