Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : Where can I find the tire replacement kit for the Renault Twingo?

Renault Twingo - Video tutorial

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2023
Part: Accessory Kit
Operation: Where can I find the tire replacement kit for the Renault Twingo?

The new generation Renault Twingo 3 does not have a jack or spare wheel, not even as an additional accessory. However, inside the car there is a tire inflation kit. The kit is located behind the small door in front of the passenger seat floor. To access the components in case of need, it is necessary to unscrew the two upper screws and lower the cover. Once the work is finished, reinsert the screws to close the cover. It is possible to purchase a spare wheel and place it in the trunk if desired.


Posted on 25 January 2024 by ScegliAuto



How to use the inflation kit on the Renault Twingo Electric
Renault Twingo (2014-2023 / Twingo 3, Twingo III) In this video we see how to use the inflation kit on the Renault Twingo Electric; this is if the punctures are not located on the side. The inflation
Wheel removal on Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Replacing the damaged wheel of the Renault Twingo? Let's see the replacement. We open the luggage compartment and take the wheel removal kit which in
To reset the tire pressure warning light of the Renault Twingo 3.
Renault Twingo (2014-2023 / Twingo 3, Twingo III) If the orange tire warning light on the instrument panel of your Renault Twingo third generation (2014-2021) remains lit and you want to manually res

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos