Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : How to disassemble the air conditioning controls of the Renault Trafic

Renault Trafic - Video tutorial

Model: Renault Trafic MK 3 - Years 2014-2024
Part: Air conditioning controls
Operation: How to disassemble the air conditioning controls of the Renault Trafic

The instructions in this guide will show us how to disassemble and replace the air conditioning controls of the Renault Trafic, in simple steps. First, we get on board the vehicle and start by removing the central plastic cover of the dashboard, levering on the sides; then we remove the radio and then the air conditioning controls, unscrewing all the fixing screws and disconnecting the electrical connectors found on the back, as shown in the video. At this point, if necessary, we replace the lights of the controls or the knobs, applying the reverse process for reassembly!


Posted on 4 March 2024 by ScegliAuto



How to replace the air conditioning bulbs in the Renault Trafic van?
Renault Trafic (2001-2014 / MK 2) In this tutorial, we can see how to replace the bulbs of the air conditioning controls in the Renault Trafic van, a very simple operation. First of a
Where are the fuses of the Renault Trafic located?
Renault Trafic (2014-2024 / MK 3) The Renault Trafic fuses are located inside the special fuse box in the vehicle. This is located behind the glovebox on the driver's side, lower left
Where are the fuses located in the Renault Trafic?
Renault Trafic (2014-2024 / MK 3) Inside the Renault Trafic, all the fuses are contained in the appropriate fuse boxes that are present in the vehicle: in this type of vehicle, it is

Other guides that may interest you

    Frequently Asked Questions

    • Trafic 2014-2027 - What are the warning lights of the Renault Trafic? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos