Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Replacement of glow plugs on Renault Clio 3

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Glow plugs
Operation: Replacement of glow plugs on Renault Clio 3

Through this very short video guide today, we can see the entire step-by-step procedure for replacing the glow plugs of a Renault Clio, third series model. We start the procedure by opening the hood of the car and removing the air intake hose and the plastic engine cover, then we remove the connectors of the glow plugs and unscrew them using a 10mm socket wrench. Once this is done, we extract the old glow plugs, also using a magnet as shown in the video, and then finally install new ones following the reverse procedure.


Posted on 4 March 2024 by ScegliAuto



Renault Clio Nissan - Qashqai 1.5 DCi engine glow plugs replacement
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial we will see how to remove and replace the engine glow plugs on a Renault Clio third series 1.5 DCi, but also on the other mode
Glow plug replacement instructions
Renault Clio (1998-2005 / Clio 2, MK 2) The function of the glow plugs is to preheat the combustion chamber and guarantee the ideal thermodynamic conditions for the combustion of diesel fue
How do you replace the spark plugs on the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) The replacement of the Renault Clio spark plugs is carried out by opening the hood, so as to be able to remove the plastic cover of the upper part of

    Frequently Asked Questions

    • Clio 2012-2019 - When does the preheating light come on in Renault Clio? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos