Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Where is the spare wheel of the Renault Clio located?

Renault Clio - Video tutorial

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Wheel
Operation: Where is the spare wheel of the Renault Clio located?

On board the Renault Clio, the spare wheel is located in the lower part of the trunk, under the car's floor: to remove it from its housing, you will need to remove the lining at the base of the trunk and remove the entire wheel replacement kit that is in this position. Below it, you will find a knob that allows you to remove the wheel by turning it counterclockwise: once the wheel has been removed from its seat, you can use it to replace one of the existing wheels, then insert it back into its seat.


Posted on 3 May 2024 by ScegliAuto



How to attach the spare wheel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this short video we will see the procedure necessary to remove and re-attach the spare wheel from its compartment of the Renault Clio. First we op
How to replace the wheel with the spare one on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will see, in this short and simple guide, how to replace the wheel with the spare one on your Renault Clio. First, let's move to the back of
Take out the spare wheel on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Removing and replacing a spare wheel is an operation we all hope we never have to do, but it can always happen. This is why it is good to know what t

    Frequently Asked Questions

    • Clio 2012-2019 - What is the position of the spare wheel on the Renault Clio? Read Answer
    • Clio 2012-2019 - Where is the Renault Clio spare wheel located? Read Answer
    • Clio 2012-2019 - How to remove the spare wheel on Renault Clio 4? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos