Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : How to replace the engine air filter of the Renault Clio 4

Renault Clio - Video tutorial

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Air filter
Operation: How to replace the engine air filter of the Renault Clio 4

If you want to find out how to replace the engine air filter on your Renault Clio 4, all you need to do is read the following guide and follow all the steps described. First of all, you need to unlock the front hood by pressing the lever located on the lower left side of the dashboard (driver's side). Then, lift the hood and locate the air filter box in the top of the engine compartment. Finally, open the box by removing the protective cover and proceed with replacing the old filter with a new one.


Posted on 8 May 2024 by ScegliAuto



How to replace the air filter of the Renault Clio 2012
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the engine air filter of your Renault Clio third series (year 2012) is really simple and thanks to the procedure described below, you will
How to replace the air filter on Renault Clio RS
Renault Clio (2019-2024 / Clio V, Clio 5) If you own the new Renault Clio RS and want to replace the engine air filter yourself, you just need to put the following steps into practice. Before
Remove the Renault Clio air filter
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) We replace the Clio air filter at every service so as not to damage the engine, let's see how. We open the car door, pull up the engine compartment o

Other guides that may interest you

    Frequently Asked Questions

    • Clio 2005-2013 - Where is the air filter located in the Renault Clio 3 16V? Read Answer
    • Clio 2019-2026 - Where is the cabin air filter located in the Renault Clio? Read Answer
    • Clio 2012-2019 - Where is the Renault Clio air filter located? Read Answer
    • Clio 2005-2013 - Where is the Renault Clio air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos