Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Master
    4. : How do you replace the brake pads in the Renault Master?

Renault Master - Video tutorial

Model: Renault Master MK 2 - Years 1997-2010
Part: Brake pads
Operation: How do you replace the brake pads in the Renault Master?

Regardless of the driving style, whether more lively or moderate, brake pads will wear out over time and will need to be replaced, just like in the video here, in which the work is done on a Renault Trafic, but the whole sequence is identical to the Renault Master. First, loosen the wheel bolts, then position the jack under the vehicle and lift it, completing the removal of the bolts and wheel. Proceed with the disassembly of the caliper, unscrewing the two fixing bolts, and finishing by removing the worn pads and inserting the new ones. Finally, reassemble everything.


Posted on 14 May 2024 by ScegliAuto



Guide to replacing the rear brake pads of the Renault Master.
Renault Master (2010-2023 / MK 3) Today's guide will show us the main steps on how to disassemble and replace the rear brake pads of the Renault Master. As a first step, we lift the v
How do you replace the rear brake pads on the Renault Master?
Renault Master (2010-2023 / MK 3) The replacement of the rear brake pads of the Renault Master is done by lifting the vehicle so that the rear wheel is not in contact with the ground:
How do i replace the rear brake pads of the Renault Master?
Renault Master (2010-2023 / MK 3) To be able to replace the rear brake pads of the Renault Master you must first remove the wheel to gain access to the disc and the brake caliper. Usi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos